[Can lambda help]

Hi I'll try it again. On the G4+ mini link it automatically adds some of the settings I might try and use the user defined instead. I wasn't sure at first if I was using the pins on the side of the connector. Ie when you mate the connectors together pin 4 on the ECU is pin2 on the canf connector if you get my meaning.

Thanks for the response.

[Can lambda help]

Hi all I have just purchased a can lambda kit to go with my link ECU. I have follow the instruction to wire it but I'm struggle to find the can device in my ECU.

I have wired the can high to pin 3 and I believe can low to pin 4 on the ECU side. Does that sound right? Is there something I'm doing wrong?

 

   Thanks

[Help needed with ecu for cooper s]

Hi everyone new to the group. I have just purchased a new ecu for my 2003 mini cooper s. But I have noticed that it says on all the paper work that a map sensor is not included. My mini has 2 map sensors as standard will these be ok or do I need to buy a link one? I have also purchased a a CAN wideband lambda sensor. But for what I can gather that will need an additional harness to be able to connect it up and use it. If I run the link CAN lambda sensor does that then mean I can remove or take out my standard narrow band sensors?

Thanks