[CAN LAMBDA WIRING]

Thank you all for the help.

If anything else i will be sure to ask.

[CAN LAMBDA WIRING]

Ok thanks.

So I just need the CANPCB cable and CANF connector to complete the installation, right?? 

 

[CAN LAMBDA WIRING]

Ahhhh...i see.

So for the wideband i need to get another CANPCB Cable and CANF Connector?????

Also, which port do i connect the CANPCB to on the ECU as there are two, see attached.

[CAN LAMBDA WIRING]

Thanks for that. Just as a final confirmation according to the diagram, since my car doesn't have the can h and can low cables I simply connect black to sensor ground and red to AN VOLT in the expansion harness? Correct? 

[CAN LAMBDA WIRING]

Please help. Link G4+ on my r33 gtst Rb25det. Confused on where the cables connect from my can lambda. 

Red - power

Black - ground

Green - ??? 

White - ??? 

Would really appreciate the info. 

[ARF Choice]

Thanks. I'll go ahead and try get the link can lambda. 

[ARF Choice]

Hi. 

Which is the best afr set I could use for my link g4+ on an rb25det R33... Stuck between the aem 30-0300 or the innovate dB blue. Please help.