Zuni_R33
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Zuni_R33
-
Hello.
Need your help/advise with something and can't seem to get around it.
Firstly, I'm running a stock oil pressure sensor but with a link g4x ecu on my r33 rb25det, can I get the ecu to read this, if so, how?
Secondly and more urgent, I have a bosch PST-F1 sensor connected to my fuel line. Strange thing is that it sort of 'delays' to read the correct value? When I prime it reads at around 25psi....then after a good 20 seconds after priming it suddenly jumps to around 35psi (matching the fuel pressure gauge reading). Also while cranking the car, it's reading a low pressure, like at 10psi even though the gauge is well above 45psi. What could be causing this inaccurate reading?
Regards, Zunaid.