[EZ30D (1st gen) base map]

On 12/21/2020 at 8:36 PM, Adamw said:

This will be a starting point.  Im unsure if the trigger mode is correct as I have never seen one with no AVCS so check RPM on the screen when you first get to crank it and if it doesnt look right then do a triggerscope so we can see what it has.

You will need to set up a few of the output that you have moved such as the fans and tacho.  The inj 5& 6 and ign 5 & 6 arent assigned yet in this map but that will happen automatically when you load the map into an ECU. 

Subaru EZ30 V7 G4+ Xtreme Plugin.pclr 163.21 kB · 1 download

You are an absolute gun! I'll load it up after the holidays, got a bit on for the moment! I've set up the trigger scopes just so we can log it by default to see what it does, if it starts first go or otherwise. I think these engines are also down one cam position sensor, so we may need to offset that. Otherwise, I believe the crank trigger pattern to be the same as the 2nd gen EZ30'R'.

Cheers mate and happy holidays to you!

[EZ30D (1st gen) base map]

3 hours ago, Adamw said:

I will probably be able to knock something up.  Im not hugely familiar with the H6 variations though.  Does this one have the AVCS and the lift solenoid on the intake only?  Cable throttle?

Oh, quick note here, I listed the incorrect ECU. It's a WRXLink V7-9, it's a 5 plug unit. Sorry about that!

Also, I attached the relevant wiring diagram which is essentially the body harness from an 01-03 Outback H6 (which mine has) incase you need any reference. 

If I can help any other way, let me know!

EZ30-diagram-from-rhino (1).pdf

[EZ30D (1st gen) base map]

14 minutes ago, Adamw said:

I will probably be able to knock something up.  Im not hugely familiar with the H6 variations though.  Does this one have the AVCS on the intake and the switched cam on exhaust?  Cable throttle?

Thank you hugely sir!

This one has the cast intake with the cable throttle body, no AVCS or AVLS on these engines, either. 

[EZ30D (1st gen) base map]

Hey guys,

I have a Link G4+ plug in (WRX107) for my H6 swapped and turbocharged Subaru Liberty, and I’m wondering if anyone has a functional base map for it so that I can get the car started and assign some sensors etc before sending it to my tuner to make his life a bit easier. 

For reference, it still has a stock fuel system with the 260~cc injectors but I’m adding a flex sensor, boost controller etc. 

Please let me know if you need any additional info  

Huge thanks all!