TommyBee
-
Posts
5 -
Joined
-
Last visited
Reputation Activity
-
TommyBee reacted to Richard Hill in Spartan 3ADV CAN Wideband connection issue
If you use the stream file I attached, it will read the data into Lambda1.
-
TommyBee reacted to Richard Hill in Spartan 3ADV CAN Wideband connection issue
Yes, Spartan has a termination resistor built in and it is enabled by default. I would use the Spartan in its default mode, use 1Mb/s and 1024 as ID. Use the attached stream definition. From the testing I have performed, the Spartan doesn't actually work in Link mode, the stream appears to be incorrect. (you would have needed to log in via serial bluetooth to change the mode/ID to Link CAN Lambda mode)
HTH,
Richard.
Spartan3ADVDefaultMode.lcs
-
TommyBee reacted to Adamw in Spartan 3ADV CAN Wideband connection issue
If you read the instructions again you will see nowhere does it tell you to go to the CAN devices tab and hit the Find devices button. This function is only used for re-programming Link CAN devices.
As per the instructions you should have a 120ohm resistor across the brown/white wires somewhere near the Spartan, although it will probably work ok without it.
Have you turned off the analog input that you had assigned to Lambda 1 with the PLX?
What does the CAN 1 section of the Runtimes screen show - any errors?
What does the Lambda 1 status and temperature show on the ECU status tab of the runtimes screen?
