Hi everyone!
I just got my 2grfe all setup in my MR2 and have been going through the motions trying to get my motor to start. It fires once and then doesnt after the first crank. I have attached a log and my map in the hope you guys might see something I am missing. I have search all over this forum and have found some really good information, but still cannot get it to fire and idle. Some quick details on my setup
Bosch 989cc injectors (same as Link sells, so all settings should be correct).
GM 3 Bar Map Sensor
IAT Temp sensor
Trig1 and Trig 2 show no errors and are syncing properly.
Timing was checked at 0 degrees and 10 degrees BTDC and seem to be perfect (200 offset at 0).
I have all the external pull-up resistors in place on my cam sensors as per the 2grfe specific sections.
E-throttle calibrated corrected (pedal and throttle)
Please take a look at my log and let me know if there is something I am missing. I am hoping it is just something stupid.
ECU: G4+ Xtreme
Thanks!
MR2 2GRFE No Start 5-24-20.llg G4+ Xtreme 2GR-FE MR2.pclr
