DobromirBG87
Members-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by DobromirBG87
-
Tried both and same thing happened.
-
Well when I hit capture and,crank the car the,whole screen freezes. After a,minute it un,freezes. However the,car started with the ls1 sensor with,the ls3 crank wheel. Not sure how. Will share update shortly.
-
Ywa but the program stall and when unfreeze it shows straight lines.
-
Swapped the sensor but yet again no rpm. The only way I get stable rpm is when I use multitooth 60-2 hall effect both triggers with pull ups and on trigger 2 cam level sync but no readings in scope and doing 120-30 on cranking...
-
So no chance runing ls3 with ls1 crank sensor ?
-
Hi Adamw, I am a bit confused. So no chance to read the 58x with the ls1 24x crank sensor ? Aren't they both hall effect ? I mean only with changing the trigger settings won't make difference ? I guess I neex to take crank sensor from ls3 then. The cam is ls1 layout so I guess the sensor will be correct.
-
Hi Adamw, Sensors should be from the ls1 or at least I guess so need to confirm this however why the scope function bugs when I try to use it ? Can this be from low battery ? When I use it the whole program stall and when un freeze it only shows straight lines...
-
Hi guys, back to the drawing board.. i blew the LS1 and put in new LS1 with LS3 crank and new Link Xtreme ECU and now i cannot start it. I think LS3 have 60-2 trigger wheel but not sure about the cam. All is the same like wiring and sensors. Strangely enough when i try to see scope reading it is only straight line both trigger one and 2. Did someone came across such issue ?
-
Well, yes as the trigger was 3-12, changed to 5-10 rpm came and started right away
-
I am ashamed to say that but the car was out of fuel...put 15ltr in the tank started right away.
-
Hi Adamw, I am attaching the map i am using and log from cranking the car. Log crank trigger issues 2020-06-11.llg LS1 e36.pclr
-
Trying now and nothing...signal from both sensorssensors is present but won't sync...
-
Hi Adamw, Will try this today however what about trigger edges ? Should they be failing or rising and also the trigger setup?
-
Hi guys, I am having issues starting my ls1 with link g4+ atom and I cannot figure out what is going on. Sensors are wired correctly and when hit f12 it shows signal but won't sync so I guess until it syncs I won't be able to fire it up ? Trigger setup is ls1 3-12 which was the setup anoter engine before this ine used to work with but this one just refuse to start...I think they are hall sensors and provided sensors with 12v.