[Turbo Speed Input: G4+ Thunder DI 11-16]

ok, and for the second turbo?

[Turbo Speed Input: G4+ Thunder DI 11-16]

I got the same probleme, interesting if or how it can be solved.

[Actually lost all respect!]

For me i can`t complain about there support, but about the result.

My ecu has still the probleme with the knock control even after sending it back to Link!

[G4+ 5.6.8 PC Link & Firmware 5.6.8 Released]

what is the last firmware for G4+?

i have the following on mine:

5.6.8.3671

[Turbo RPM calibration]

Following, i have the same issue

[Knock sensors stop reading]

that means it is a problem whit the software and not with my settings?

[Knock sensors stop reading]

if you need more info, please let me know

 

[Knock sensors stop reading]

how can kock system status lockout- rpm high be aktive at 4500rpm if set to 6200rpm?

please help to understand

Thanks

[Knock sensors stop reading]

Hi, can please someone have a look on this log, maybe can find the probleme in here

Thanksknock lockout.llg

[Knock sensors stop reading]

it looks like the probleme comes only when gear shift mode is on, have driven the car today with the mode off and no problem

[Knock sensors stop reading]

mine does exactly the same

[Different sensors for plugin G4x ecu]

ok, thx

[Different sensors for plugin G4x ecu]

Hi, have another question,

have a stack wideband gauge with the sensor and there is a 0-5v output on it, can i use this and wire to the oxy signal in the ecu and use as wideband?

thanks for advice

[Different sensors for plugin G4x ecu]

Ok, thanks for this info, so i know now what to do

[Different sensors for plugin G4x ecu]

Hi,

i want to wire in the following sensors in a G4x plugin ecu in an R34GTT:

EGT, Turbo Speed and wide band lambda, can they be wired direct to the ecu or do i need some

converters?

Thanks for advice

Yvo

[Knock sensors stop reading]

On 10/14/2020 at 8:10 PM, lostsoul said:

Also using a "Thunder" and have/had this problem for a while. Link have asked me to send the ECU back for inspection, which I will do when I don't have to have the car mobile.

did you already send the ecu back to link?

 

[Internal knock issue G4+ Thunder]

still no news about your problem?

[turbo speed sensor]

had the same on my rb26, you need more engine rpm to show you turbo rpm

[Internal knock issue G4+ Thunder]

have you solved the issue with the stuck knk level?

 

[Does Link Control RB26 Idle Air Regulator?]

This is nod needed, mine isn't connected and all works like it should

[Knock sensors stop reading]

Eves after the update it is still the same

[Knock sensors stop reading]

if i switch off the car and start it again they read like normal for a short time

[Knock sensors stop reading]

thanks for this info, so need to email them

[Thunder Aux out (pulls low)]

think you need an ignition switched positv to controle the relay

[Knock sensors stop reading]

no one had this probleme or have an idea why this happens?