AJ 2JZGE-T Supramkiv
Members-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by AJ 2JZGE-T Supramkiv
-
Adam, I had my tuner log in remotely through team viewer to have a look for 20 min today and he made some changes to fuel and ignition. I have added those to your map and run a log for you. Thank you very much for your assistance. I hear the iscv pulling air and then changing to pull more. and rpm greatly increasing. I pulled it apart today to check inside and all was clean and bearing good, magnet was strong. unsure if it is operating right though
-
I've picked up on the iscv problem and had changed to 6 wire open loop. Didn't solve problem of gear change but obviously should operate better. I copied settings from GTE base file in link software. Have also tried putting in more timing, fuel with no success. It seems it only shifts into gear at ect in 70's and ait 40's or early 50's and without any timing. If you could please look at it and I'm happy to try anything at this point. I just need it running well enough to get to tuner and dyno next Thursday
-
Adam, current ecu file and 3 log files. one start up and run, one start up with ramps and stall on gear change, and last star up with gear changes working. arons mid life Log 7-01-21 7;16;17 pm.llg Log 7-01-21 7;17;35 pm-rampnstall.llg Sorry reached limit on upload. wont let me attach last log with drive changes working
-
Having trouble getting my base map to work changing to load. I have a 2JZ GE + turbo. Running stock ecu parallel for auto control. Using a g4 xtreme red. Latest firmware update. Can only get it into gear after 30 min run time on idle. Once in gear I can drive no issue for up to 20 min so far (haven't tried to go further). Can anyone help with a base map I could try. Or I can send file to an admin to look over if that's possible