Andreigc8

i need a Man truck

I think i found the problem . Adam was right it is a 24v

Update , @adamw i put it in testpwm with 5hz and it clicked multiple times, going up to 6 hz and also clicks. At 7 hz it clicks but very quiet , and from 8hz onwords no sound

@Confused i connect it to the original plug . Original already have 3 port boost solenoid

Ok,thanks alot! Maybe @Adamw can help

@koracing logs attached .pwm test 20hz. It only click once when i set active state to high active state high aux3.llgx active state low aux3.llgx

Thanks alot! I will do a log and post, and also test the wire with a multimeter

Map attached @koracing atf.pclx

20hz ,output aux3,pwm set selected. I will post a copy asap

I replaced the factory boost solenoid with a Link 3 port solenoid valve. I wire it in the same plug as original but it doesn't work I checked the wires and i have +12v on both (ignition ON) . You can point me what i am doing wrong please? I try test mode PWM but it doesn't click , just 1 single click when i change the option "state" low to high

Many thanks Adam!

I was thinking to install Bosch 3 wire idle valve.

Since the Idle valve 22650AA132 it is no longer produced amd can't find new one, i want to ask if i can put other brand idle valve and configure it in Link G4x plug and play V3-V4? OEM is a 3 pin iacv

Thanks Adam. Any recommendations for windows tablet? Good brands tablets do not have 2 ports,so i think the only option is a chinesse right?

Hi all! I just ordered G4x for Impreza 97-98 and i want to know if it is compatible with realdash. What is the best option for parameters display , android tablet with realdash or windows tablet with Pclink?