xmel012
Members-
Posts
7 -
Joined
-
Last visited
xmel012's Achievements
-
Guys , i have a got a problem with evo X throttle Evo 9 with link g4x and evo X throttle Sometimes appears check engine with traction throttle mistake and i cannot use acceleration pedal( pedal does not respond) this is the second throttle with the same mistake. What should i do? does the X throttle the best to use? Or do we have somth better than X?
-
It has a kit of +1mm valves and springs supertech as i remember
-
Will do please see my video launch control in active and strange behaviour of my car on idle after launch seems as candles are flooded
-
xmel012 started following Lancer Evolution question and Evo 9 launch control
-
Guys , i have g4x ecu on my evo9 stock turbo with evo 10 throttle . Launch works but i can’t start good. Car fails/pecks when i release the clutch.( car chokes). also when i stay on idling , hold gas pedal (activate launch ) and then release the pedal the car works as with two cylinders (fills with fuel) . what am I doing wrong? The 2nd question is how to tune ALS? thank you for response
-
When i had stock ecu i had the sane fuel cars: octane and octane with meth. So i just needed to switch off engine ,hold acc pedal and thats all! No needed any buttons . Can i release with Link the same? If yes could you please point the way in soft? Thanks a lot
-
Hi Guys, i’ve got Evo9 with Link G4X ecu. I need to have two programs : octane and methanol. is it possible to switch between two programs via accelerator pedal for example ? Or there is only one way- to install bottom ..