[link g4x monsoon can lambda not reading]

hello

Currently using link g4x monsoon but afr is not read

The wiring was correctly entered on the ecu side, and the can setting was also done correctly (I also checked it by searching for can lambda). I also performed a version upgrade.
I installed it several times before and there was no problem. But this time it didn't work, so I suspect that the sensor is defective. Are there other problems?

[link g4x monsoon knock control]

Vaughan thank you
My laptop program was not updated. Thank you again.

[link g4x monsoon knock control]

Attach the map file

20221026_tuscani_road.pclx 20221026_tuscani_road.pclx

[link g4x monsoon knock control]

hello
I'm using link g4x monsoon but I don't see the knock control in the basemap
There is a glitch in the wiring diagram...
I wonder if the basemap I used is a basemap provided by default or if it exists separately.
If anyone knows about it, please reply.
thank you

[LINK G4+ extreme boost control problem !]

I've already seen the boost go up normally using pwm tests and mechanical boost control.
So, even try replacing the Mac 35 valve with one that uses ...
I also doubted whether it would be possible in the G4+ Extreme.
So, I asked the Aux Output setup question first.
I will keep trying
Thank you

[LINK G4+ extreme boost control problem !]

The current boost no longer rises from the Westgate normal boost of 1.1 bar.
I've tried various Mac 3 port lines, just in case, but it doesn't work.
please help ~

20221016_is300_boost.llg

[LINK G4+ extreme boost control problem !]

thanks for the help adamw
First of all, we will conduct a dyno test again and upload the logging data related to boost as soon as possible.
thank you

[LINK G4+ extreme boost control problem !]

thanks for the quick reply
I can't test the dyno right now, so I'm uploading only map files and image files
During the dyno test, I was able to see the duty cycle go up to 100.
Thanks for any reply

202210013_is300_2jz_dyno_boost.pclr

[LINK G4+ extreme boost control problem !]

hello
Here is Korea
I'm currently using a  G4+ extreme and trying to control the westgate with a mac 35 valve using aem rotary switch.
All settings seem to be normal, but there is no control
Solenoid control used aux4
In g4x, there is a pwm output setting, but it seems that g4+ does not seem to be used, so I wonder if there should be a specific aux.
Please reply if you know thank you