James West

Thanks guys. I remembered i had a full blacktop loom lying around and the loom i had was different to the pinouts above and all the ones online. 2 was not connected 3 was signal. I swapped that wire in the plug and it works!

tune added. will get a log tonight. G4+ Atom 4AGE 20V BASE MAP MODIFIED.pclr

I have made a base tune for my car however when i calibrate the TPS it still is very slow. when the engine is off, I can go flat and it will slowly raise to 100% throttle over 5-6 seconds rather than straight away. i changed tps's and still happens. Is this correct or have i got a wiring problem? Thanks

Thanks Adam. one more question. What is the recommended wire wrap for the CAN wiring? Is PET braided wire okay?

Hey I need to wire my CAN Bus in my car. i have a Link Atom 2, Aim Strata dash and CAN lambda. The CAN lambda connection is inbetween the dash and ECU. Can i crimp both the dash & ecu CAN High wires into the Deutsch plug connector terminal on the link CAN lambda device? And same with the LOW? or does the CAN bus need to run from the dash to the ECU uninterrupted and the lambda be spliced in? Thanks CAN Lambda.pdf

Hey. I am running a Link Atom 2 in a 4age 20v powered AE86. Can i use a digital input from a switch to trigger the radiator fan that i have being triggered through Aux 2 as an override? Thanks