Oms

Thank you

The ECU Header plugs one of the 040/070 plugs is a little loose. I couldnt get them from toyota uk as apparently they do not sell them? ive managed to source them elsewhere so will remake the loom. ive not altered the setting just yet as soon as i remake the plug/harness ill update. Is there any issues with using 0.75mm sq or 1mmsq for all the conductors? ive got acess to 3gkw cable which is a better grade than avss but am unsure as to if therewill be resistance issues

Hi it was the engine that cut, worked fine before ive put it down to a wiring fault on the ageing Toyota plugs. i dont suppose there is a good supplier of these anyone can point me in the direction of? Thank you both for your assistance

Current log attached. starts and cuts, have i missed something here? firmware updated and lambda 1 set to link can, looks like its reading? Thanks guys PC Datalog - 2023-05-5 12;25;21 pm.llgx

so im just rewiring it now ive gone green to green can L to can L and white (pin 4 on wideband gauge) to the brown on this plug. Will change to link can and run a log It now starts and cuts straight away

Hi All, Ive connected an aem wideband cand double checked the wiring but the ecu will not see it, is there something im missing, map and logs included. tst205x 3sgte. Thanks in advence PC Datalog - 2023-05-3 4;41;16 pm.llgx OP map upped fuel.pclx