noahbid

Hi guys I am having dramas with getting my speedo working. The speed out to my dash works when I do a test sweep, but the Hall effect isn’t working from the gear box and I can’t get a pulse from it. Is it my set up for the sensor or is it because I am using a factory gm speed sensor? NOAH-VS-STARTUP-BOOST-ANTILAG-e85-330kw-nosparkidle (1).pclx

Resistor plugs did the trick. Thanks heaps guys

Putting resisted plugs and coil suppressors in tomorrow. Coils grounded to head i believe and ecu grounded on its own to the body

Coils and ecu both grounded separately. Not 100% sure on the plugs. Could they be the issue??

It’s got LS1 coils. All trigger wires are shielded

Hi guys recently got my ecotec running with a link G4x xtreme and am having a problem where as soon as it makes any boost it stops reading rpm and shuts down?? also having problems keeping the laptop connected. That’s also dropping out randomly

I’ve got Link G4x xtreme and am trying to setup the can lambda but it won’t show a reading. Doing everything in the instructions but no luck. Do I need an ohm resistor with this setup????