GV42

@Adamw you are a STAR! i did a bit of reading from your post, i saw there is a deadband setting, i set this to 18%, as a test... no more cold start issues, AFR is on target , and it runs far , far better, so, going to fit new tps, with shielded cable, new connectors too! again THANK YOU!!

thank you for the reply's!! i could unplug it for a test?

hello there , i have a suzuki jimny with a m16a engine installed and a monsoonx ecu, and wideband o2 sensor not been to a dyno, but its running very rich, no faults, everything seems to be ok? idle is good, very poor cold start here is a log PC Datalog - 2024-05-5 3;44;07 pm.llgx

Did you ever get a base map or have one?

Thank you for the reply! That with a wiring loom , what else would be needed for a m16a engine? Have read possible sensors? Pre and post cat? Regards Mark

Hello all! First time post!! Been recommended a link ecu! But which one? It's for a modded suzuki jimny tray back Has a liana m16a engine with vvt , custom exhaust by Tony Banks, a custom manifold from Australia, and soon to be fitted a custom throttle body Currently has a piggyback dynotech rs600 ecu, which isn't that good! Want a full stand alone ecu, so which would suit my needs? Regards Mark