[help with suzuki m16a and monsoonx!]

@Adamw you are a STAR! i did a bit of reading from your post, i saw there is a deadband setting, i set this to 18%, as a test... no more cold start issues, AFR is on target , and it runs far , far better, so, going to fit new tps, with shielded cable, new connectors too!  again THANK YOU!! 

[help with suzuki m16a and monsoonx!]

thank you for the reply's!! i could unplug it for a test?

[help with suzuki m16a and monsoonx!]

hello there , i have a suzuki jimny with a m16a engine installed and a monsoonx ecu, and wideband o2 sensor

 

not been to a dyno, but its running very rich, no faults, everything seems to be ok? idle is good, very poor cold start

 

here is a log

PC Datalog - 2024-05-5 3;44;07 pm.llgx

[base map for Suzuki m15a engine]

Did you ever get a base map or have one?

[Which link ecu for a jimny with]

Thank you for the reply! 

That with a wiring loom , what else would be needed for a m16a engine? 

Have read possible sensors? Pre and post cat?

 

Regards 

 

Mark

 

 

 

[Which link ecu for a jimny with]

Hello all! First time post!!

 

 

Been recommended a link ecu! But which one?

It's for a modded suzuki jimny tray back

 

Has a liana m16a engine with vvt , custom exhaust by Tony Banks,  a custom manifold from Australia,  and soon to be fitted a custom throttle body

Currently has a piggyback dynotech rs600 ecu,  which isn't that good!

 

Want a full stand alone ecu,  so which would suit my needs?

 

 

Regards 

 

Mark