M.JH Rb20

Okay I’ve been away for work for 2 weeks. But tonight my first night in the shop I did my best to transfer the settings. And I can’t seem to get a fire. Although it seems it’s trying to fire. I feel I may have missed something. I tried to run of the Maf this time as it’s already hooked up with the z32 Maf. I can provide a log later today. rb20 det base map 3.0.pclx

Okay so I checked and i have spark. And smell fuel but my timing light seems be not working with the lead I’m using. Although it did before. When I have the plug out it sparks. I’ll work on transferring the gts injector/ignition settings over.

I have the stock injectors in at this time. But I have 700cc injectors I could put in. I just didn’t want to change them without adjusting the ecu yet. Hoping to get it to start before I messed with the injector settings. and I wasn’t aware I could check timing with out turning over the car. I’ll do that now.

It seems as I’m not getting any fuel or spark. I even bought a new timing light figuring maybe I dropped it and broke it. But I did have the timing light working with the CAS for a brief moment before the Link G4X install I have fuel pressure and I have checked grounds it seems my grounding is good. Since we’ve got the cam sensor “working” tonight I have not - Checked visually to see if the injectors or spark is occurring. But the timing light still isn’t reading.

Yes I had it fire on a Rs-Enthalpy tune but didn’t want to send it back to be retuned(injector issues) So I bought the link G4X. And have Not had it fire since link install. I had the CAS on the car with the link G4x and I had signal to the injectors and spark. But I had the CAS in without CAS gasket and the cam bolts broke the CAS. Since then he just thrown money at the problem. I replaced the coilpack harness (wiring specialties) and bought a new ignighter pack (yellow jackets). The coilpacks are new and all grounded via Splitfire grounding kit. And purchased the Nz/Y-D cam sensor.

PC Datalog - 2024-02-20 5_45_18 pm.llgx

Let me know if that works. Sending files from my computer to my phone isn’t always reliable. I adjusted the arming threshold as shown above. rb20 map.rar

This work ? rb20 map 2.pclx

I have a Yelesh D cam sensor and I can’t seem to get it to work. I’ve set the switches on the board. And checked clearance from sensor to the trigger wheel. I’ve checked grounds around the engine all are good. There’s many different topics out there on this subject. I’ve tried multiple ways of wiring this up and have had no success. There’s no professional help I can get locally. So any help would be appreciated. Thanks.