Jump to content

dmacnz

Members
 View Profile  See their activity

  • Posts

    44

  • Joined

  • Last visited

 Content Type 

Posts posted by dmacnz

  1. Closed loop idle/ E-throttle/ Big Cam

    in G4+

    Posted

    Hi,

    I have a issue where I am running a large cam (289 degree) and require around 7% TP to get the car to idle. As the max lockout for Closed loop is 5%. Is it possible to increase this lockout somehow?
    Or do i have to resort to drilling a hole in my throttle plate?

    Engine is a Ej22,ID2000, big turbo etc

  4. CAN AN INPUTS

    in G4+

    Posted

    Hi,

    I am wanting to input 12 AN channels from a IR temp sensor module (CAN). I see the in the PC link can setup there is only 8 AN inputs. IS there a way to use 12? Or am i going to have to split some into the ECU AN inputs and some over CAN?

    I am using a G4+ Extreme.

    Thanks
    Dan

  5. Can protocol sample

    in G4+

    Posted

    Sorry One more question on the CAN output for Generic dash. 
    The help file says raw. But can i assume for say the oil temp in frame 9. It is calculated (data 3*256 )- data 2). Is purely transmitted in the data 2, with data 3 being "00". (Disregaring the 50 degree offset).

    Thanks

    Screenshot (25).png

  7. Can protocol sample

    in G4+

    Posted

    Thanks for the reply.
    The hardware simulator is being built. But I want to make sure I am going to replicate exactly what my dash will receive from my G4+. Only way I can test and debug my project being 9000km away from my race cars!!

    Looking at the help file for the Generic dash for .data 2-3 is 0x000-- 0xfff for 0-15000rpm?? , I cant quite make heads or tails of the help file. Any more info on the CAN protocol specifically when using generic dash as aout would be great.
    Thanks

  8. Can protocol sample

    in G4+

    Posted

    Is there anyway of getting a sample of the can stream output when set to motec adl dash?

    I am currently the other side of the world from my ecu and trying to build a can based project. 

    Any more details available other than what’s in the help file?!

    i am building a can simulator and would like it to output the same as what I can expect from my g4+ when set to motec or generic dash. 

     

    Thanks

    Dan

  11. Aux 9/10 feed error normal?

    in G4+

    Posted

    Still unable to make the e-throttle work in "on" mode. Its works perfect in setup mode with no error messages.
    As soon as I change the setting to "on" it kills power (e-throttle relay 1). And then the Aux9/10 feed error comes up.

    Any ideas?

    Using Aux 9.10 for e throttle outs. and a Fuel aux out for the E-trottle relay..

    Everything works perfect in Setup mode!

  13. Trigger errors on startup normal??

    in G4+

    Posted

    Hi,

    G4+ Extreme, Wired into a GC8 race car. Freshly rewired.
    The car is not starting and is showing trigger errors while cranking. However the the trigger scope looks normal too me.
    Using the normal Subaru settings for trigger wheels and arming volatges.

    Any ideas?!
    Thanks
    Dan

    Screen Shot 2017-06-07 at 7.51.17 PM.png

  14. Aux 9/10 feed error normal?

    in G4+

    Posted

    Hi,

    I have installed a subaru OEM based E-throttle on my project car. 
    I have a AUX controller the feed relay for the AUX9/10.

    On a G4+ Extreme 

    Is it normal to have a Au9/10 power feed error when the e-throttle relay is no latched?! I would of thought the software would know it turned the relay off and not trigger a error?! Not sure if i have buggered up the wiring or its normal.
    Throttle works perfect in "setup" mode. Engine hasnt been fired up yet.

  16. Trigger sensor voltage

    in G4+

    Posted

    Hi,


    I am almost finished wiring up a G4+ extreme wire in ECU into a Subaru. Using the stock cam and crank trigger sensors. Should these be 5v,8v or 12v. Or is it not too critical as long as the trigger voltage is set as required.

     

     

    Thanks

    Dan

  17. Unable to turn on E-throttle

    in G4+

    Posted

    Hi,

    I am looking for some advise regarding E-throttle.

    I have built a startup map from scratch, Based on the Extreme base map. 
    I am trying to setup the PIDs but am unable to get the E-throttle to turn "on" or "on -setup".

    I have assigned E-throttle + and -, plus relay.

    It is on a Subaru which has been retrofitted with the later model E throttle.

    Any help would be great.

    Thanks

     

    G4+ Xtreme Ej22.pclr

  20. Setup Analog to Can Converter

    in G4+

    Posted · Edited by dmacnz

    Hi dmacnz, 

    Are you talking about the gauge art one, or something different? I had a look at the gauge art analog to CAN converter, it looks like it may not be available yet.

    Seems it is available, I think they will be in touch with Link! Keen to give this a go!

  21. Setup Analog to Can Converter

    in G4+

    Posted

    Im willing to buy the gauge sport device and send it to Link to get the Can protocols done!!

    I am  running a plug in G4+ and in dire need of some more inputs!!!

    Hi all,

    The Link G4+/Vi-PEC iSeries CAN is customisable by the user, and so most CAN devices should be able to be supported. Looking at the GaugeArt device I can't see why it could not be supported. If there was a problem we are happy for you to send the device to us so we can determine the settings and make it easier for customers in the future.

    Some of the devices are already supported by us with setup files or instructions.

    Check out PCLink Help > G4+ ECU Tuning Functions > CAN > Device Specific CAN Information

     

    CAN devices.PNG

  22. Gear indication

    in G4+

    Posted

    HI,

    Quick question, I can see the gear from the "detection" in the run time values. But is this possible to be displayed on a digital "guage". I can only see Gear calculation in the parameters. 
    Is there a way to display this?!


    Thanks
    Dan

  23. V5.4 Temp sensors CAL tables changed?

    in G4+

    Posted

    Question on the V5.4 firmware.

    Ever since updating to 5.4 my car seems to indicate running hot. I have checked the fan setting and they are still working fine. Have done everything to sort out this problem. Curious if any of the stock 'cal tables" for the generic sensors were modified with this update. 
    The car is a Subaru wrx V2. using the latest firmware on a g4+

    Thanks

     

     

  24. No Closed Loop feeling with Launch control armed

    in G4+

    Posted

    Hi,

    have updated to the new firmware! Very nice thanks!

    Have a small problem! I hmed. ave my launch control always on ArBut it seems now even when it is only armed(not active) The closed loop fuel is deactivated.

    Any ideas on how to fix this?
    It use to only cut the closed loop fuel when the launch control was active.
    Thanks

×
×
  • Create New...