Giannis Leontiadis

fuel is good i have 3 bar at fuel line and cant use cold start the car worked and tune with timing light so turn cas from right and burned a safety i replace that but then not work never..... maybe the problem is at ecu? logging is good connect to pclaptop runtimes is work good... Â

yes i do with timing light i have signal sync engine at 16 degrees then open the injectors and dont start to anyone cylinder suppose to get start...... change cas its same change ignition driver its same

i have signal trig 1 trig 2 and sync with cas ,have 200-300 rpm and engine dont start i have ignition and injector (work) i put and 60-2 1 cam vr sensor again i havve signal but engine dont start what happend thanks a lot!

hmmmm ok so if i put fuel regulator change the dead time of injectors.. because change bar of fuel flow right?and how to set master fuel (ms) how to know when is 100%? i use mgp(kpa) with rpm (axis) and my max price is 18.7 at cell so i am good and my master fuel is 50ms.

i have one ca18det with id 1000cc 255 warlbro fuel pump and cant doing the fuel map when go 0.6 bar as much fuel i give on fuel map the fuel is lean.......the duty cyl peaked at 50% at 0.6 bar (gt2871) some explanation?