[RPM LIMIT bangs]

Change end cut to something like 75-80% rather than 100%.

[St205 with an st215 caldina idle control valve issue]

As above, I find these nearly always need to come off and be cleaned and WD40 run through them whilst in test mode at 10hz then the work correctly. 

[WHO RUNS A Toyota 1zz on Monsoon??]

I have a base map I could provide you for this engine. It was a tuned example with headwork and cams but stock compression ratio and injectors etc so should be a damn good starting point for you. Drop me a PM if you need it.

[Toyota 86 CAN]

16 hours ago, mapper said:

I know a guy from Dubai has integrated a Furry ECU into a a GT86. He spent arround 3 days to make the CAN work. So it couldn't be too difficult. 

If there are to less adresses available in the LINK ECU, you can use a Motec Dash as a Gateway between. Maybe the AIM Link dash could do that,too. 

As above, I built a 2jz gt86 using a link Fury. Oleg Zaytsev from dynotech Ukraine was kind enough to share his CAN data with me. Everything worked on the car that we had on. We removed the ABS & airbag system as it was a show car so I cant verify abs and tcs but absolutely everything else worked as it should.

 

 

[Graph Issue PC Link]

Thanks for that, turns out I have some graphics driver issues. I upgraded this old laptop to windows 10 and the latest driver had issues. Had to roll back to an earlier version and it is all good now.

[Graph Issue PC Link]

Is anybody getting screwed graph rendering with the latest PC link? Mine looks like the below, any ideas on a fix?