Sean S
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Downloads
Posts posted by Sean S
-
-
-
-
The car is a wrx bugeye MY01, whoever done the mods also put a V5 ecu as it originally comes with a V7. Note: Before I spun a bearing it was running micky mouse with the mods done. Id' like to run it on the 3 bar map sensor again not the factory setting.
The problem would be simple to fix im sure. The idle is going up and down on both settings, the factory setting and the High 3 bar setting.
Factory setting link to vid
https://1drv.ms/v/s!AknC3VO9dy5cgeoQ...Pz1xA?e=jChVi1
3 bar map sensor link to vid
https://1drv.ms/v/s!AknC3VO9dy5cgeoS...EjA_A?e=6no9YH
It will be something so damn simple I just dont know where to go in the program or what to adjust. -
Ok, currently I running on base map as for some reason when connected to the mqp sensor for the ecu the car just wouldnt start. DO you sell the GM 3 bar?
-
Hi Simon
I am certain I've blown my 3 tier map sensor. What brand or type of sensor do you recommend and do you sell them? Running possum link G1 V5 for a Subaru WRX bugeye, MY01.
-
Ok thanks
-
Hi Simon, throttle position is at 50% and unable to change, so it runs extremely rich. Any suggestions?
-
Ok so have that sorted throttle body cleaner fixed that though now its coughing like I have an exhaust leak which I dont, how do I tune the Link G1 ecu to get rid of this issue?
-
Have an issue with idling at double what it should be. The ecu is in a WRX V5. Running a G1 possumlink
Can any one suggest what or how to change the idle speed and hopefully bring it back down to 750rpm.
Also when throttle is pushed it seems to stick there for a second then slowly come back down.
-
Link G1 V5 Wrx What the hell is this problem?
in Link G1
Posted
Ok thanks Adam