Chan
-
Posts
6 -
Joined
-
Last visited
Reputation Activity
-
Chan reacted to Simon in LSU 4.9 wire to force GDI
From sensor to its plug there will be only 5 wires this is normal, The 6th pin is a calibration pin and must be connect back to the ECU. So on the ECU side of the plug you need all 6 connections.
-
Chan reacted to Scott in LSU 4.9 wire to force GDI
Pin 5 on the sensor side of the connector goes to the calibration resistor (built into connector). On the ECU side of the connector this pin should go to the MES terminal.
Scott
