StijnFSP
-
Posts
90 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by StijnFSP
-
-
i think the timing belt is off or something because all 1.8t with med 7.5 ecu are same trigger paterns .
-
any new on release date ??
-
Ok thnx will try that
-
hi ,
i'm runiing a g4+plugin v7-9 on a rally car but with no oem dash i have the dash 2 pro installed all working fine
but i've installed a DCCD controller and it needs rpm signial i wirred the aux 4 directly through the dccd controller without the oem dash but i dont receive any signial
is this caused because i dont have the oem dash installed ? because with the speed signial it was that problem .
thnx in advance
-
Worked like a charm thnx
-
Ok thnx didnt know that thank u verry much !
-
hi can u guys convert this file easely to a g4+ file ? or do i need to change it myself because its a time consuming thin maybe u guys have a quick solution ?
thnx in advance
-
no didnt try because of the 12V connected to the ecu but will do this . thnx for the tip
-
hi ,
i have a problem with the digital input of the speed sensor of a subaru i tired :
other sensor
rewirred the 3 wires 12v ground and signial
manualy rotating the sensor
tried another input on the ecu (di3 di4 and the oem di5 )maybe i made a fault ?
i added the file
or could there be a fault in the ecu ?
thnx already for looking .
-
-
Check the engine coolant temp sensor wirring to make sure the pins are correctly ground and 5v
-
Ok stupid me overlooked the gain on each cilinder
-
Will check that on anothet car i tried to set up because on my v3-v4 impreza its working perfect . maybe i uploaded the wrong map will look at it when i have the car. With me i just quickly adjusted a map to upload it sorry if thats the issue i feel realy stupid that i overlooked it
-
Had the same issue on a ttlink so i also think its a bug
-
-
Hi i cant get knk readings on a tt link+ and tried it on several tt links is there a wirring i need to change ?
thnx
-
It reads fine and also looked at the help file i just want to know if someone else used the knock sensor of thr v3-4
-
Hi what khz do best use on a ej20 with v3-4 knock sensor and g4+
-
Ok thnx thats an easy fix
-
Hi ,
i wired a dash2pro in and it works but only thing i cant get the ecu online on pc linkwith the dash connected
setup is dash2 pro to can1 of a wrx v7-9 setup cansettings as in help
When i disconnect the dash pc link gets online right away
do i need to use can 2?
-
yeah i can see the values will note them down and send them
-
tried that didnt work ,on the base file they arent on also . wired in from di 1 and 2 to sensor to sensor ground
-
Hi, i retrofitted a my2004 sti engine in a my99 subaru i repinned everything and its running on the V5-V6 link g4+
but the cam control isnt reading the degrees . with the cam test on it reads some degrees but without the test not .
but the soleoids are working acording to runtime value .
added the cal
-
Hi,
i have a wrx link v3-4 and want to wire in a egt sensor i have one from link and a thermocouple but i was reading on the help and i didnt find the right way to wire it in ?
i understand that i need an amplyfier can u tell me witch one i need?
toyota 2zz ge engine trigger patern and vvtli
in G4+
Posted
hi can i use the 1zz triggers for the 2zz ge engine or not ?
i have a custumor that wants to put a 2zz engine inanother car and i want to use a link ecu to control it .
can i do this ?
kind regards
found it in the help menu