[TT link g4+]

thnx for the reply i already  redid the wirring to a narrowband . 

 

[TT link g4+]

i checked in oem software and  oem its on off during warum going to play with it with the link to see if i can make better spool . 

but in oem software u can change the way it works that its closed loop cam control but i'm just going to try with the on off type .cam switched . 

also about the wideband it doesnt read it i supose ? 

 

thnx for the reply 

[TT link g4+]

because on aux fuel 6 i cant select VVT solenoid . and acoording to the manual its on that pin

[TT link g4+]

hi , ive installed a tt link on a 2003 engine but this engine has VVT how do i control that ? and does the ecu reads the oem wideband lambda? 

also the idle does sometimes bounce and stalls on idle whats the easiest way to calibrate the drive by wire throttle . ? 

thnx . 

[Rev limit problem on g4+ pnp subaru my99]

Hi , i was tuning a my 99 and when i reached 2.0 bar boost on a gtx35 

the rev limit overshootet it was programmed 7300 rpm but overschoots then didnt cut ever went to 8000 rpm 

before it didnt get to 7300 

settings where on fuelcut and advanced off i tried diffrent settings bit didnt work 

when i put it on ign cut it does limit but on 6800 rpm 

map limit is on 330kpa 

any ideas. 

Thnx 

[No cl lambda automode with can lambda on g4+]

thnx sorry for the late rely but everything works great now 

[No cl lambda automode with can lambda on g4+]

What would u suggest to have it working all the time this is my first auto mode setup 

thnx already for the help 

[No cl lambda automode with can lambda on g4+]

added the file 

Stijn anti lag lc wideband can wmi Cl loop auto mode.pclr

[No cl lambda automode with can lambda on g4+]

Hi i got a g4+ pnp for subaru impreza my 97 -98 

got can lambda kit wired in and working reads lambda good 

cl lambda works on stoich mode but not auto mode.

got latest firmware etc any ideas ?

[Lambda control when launchcontrol is active]

ok thnx !

[Lambda control when launchcontrol is active]

attached. 

nick gtx 35.pclr

[Lambda control when launchcontrol is active]

Hi , 

ive tuned some link ecu in the past and with the G4 the lambda control stays active when u arm the launch control 

but in the g4+ the lambda control is disabled when launch control is active 

ist setup on stoich mode wide band . 

can anyone help me to get it active when armed because when it makes boost lambda control is turned off but my custumor want to have the launch armed so when he stops at a red light the launch is active. 

 

thnx .