tarlo

Hi guys i have been mucking around with virtual auxiliaries and when i was setting up (see attachment) i found that making timer 3 the third condition it doesn't put the time unit after the value. i figured it would be seconds as above so i entered 10 but found that it trigger after 0.100 of a second or there abouts. i tried putting timer 3 > into condition 3 of virtual aux 5 and it did not have the same problem. Is this a bug or is there something i'm missing? thanks Matt

hi just wondering if anyone knows where i can get another iat sensor the same as this one it has eaton markings on it but i cant find any info on it anywhere

thanks mate

hi guys when veiwing log files with my fury i have a few time plot with rpm map etc, one of them is lambda and it auto scales itself between 0-10 due to the lamda being of scale when logging begins which makes the resolution terrible and it just looks like a flat line. you can zoom vertically but it only gets you so far and it still has to large a scale is there any way i can fix the scale from .6-1.3 etc last run.llg sony vaio 8.7.17.llf 6.8.17.pclr

hi guys just wanted to post this to help other that may come accross it i purchased an r31 with rb30 in it and ross trigger setup it had honeywell gt101's on it at the time i rewired the car and in the process replaced the honeywells with cherry alternatives when car runs i found that i was getting no consitent trigger errors 30-40/5min period after help form adam and simon and ross (all were extremely helpfull) found that the particular pickup i have was one which ross dont make anymore due to having trigger errors you can see in the trigger scopes below a normal cycle and i was lucky enough to trigger scope right when an error occured which you can see is the large pulse inbetween the two cam pulses this is caused by the cherry sensors being sensitive enough to pickup the balencing hole inside the pickup opposite the cam pulse. (honeywell sensors as far as im awear have some sort of integrated filtering which stops this occuring) ross have very kindly said they will replace the pickup thanks again to simon and adam esspecially who made fault finding this alot easier matt