randolph
-
Posts
58 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by randolph
-
-
Hi, i’m having some confusion between what the can lambda manual say and what the link ecu product on sale, in the can lambda manual it says to use 18 awg wire connected from relay, but on the other hand the link part number: canext that is suppose to connected can devices directly(cleaner) uses a much smaller gauge of wire.i have include to pics, one displaying how i’ve connected 4 link can lambda and one can gauge(functioning) and one pics of the link can lambda instruction. My question and concern is if the small gauge power wire is large enough for all these devices or should i go with the manual and add a relay to power up the 4 lambda modules, thank you
-
22 hours ago, randolph said:
hello,
I have wired 4 link can lambda on a ej 25 motor, configured correctly but for some reason the lambda 2 is displaying 0. tried different option with no success, i have tested the module being used on cylinder 2(lambda 2) by only selecting it as lambda 1 just to make sure that it is not the module, sensor or wire that is faulty and it's fine. all other 3 cylinder(la 1,la 3, la 4) works fine, i have attached the file and a small logs to review and help out,
thank you, randolph.
marcus.pclx 432.25 kB · 1 download marcus no lambda 2 display.llgx 601.36 kB · 1 download
Hi guys,
just going over the file and i noticed that lambda 2 analogue is set to none, i suppose i've found the problem, i will have the car back tomorrow to confirm,
in any case i will update tomorrow
Ok guys, it’s sorted, was the lambda 2 not set to link can as suspected
-
hello,
I have wired 4 link can lambda on a ej 25 motor, configured correctly but for some reason the lambda 2 is displaying 0. tried different option with no success, i have tested the module being used on cylinder 2(lambda 2) by only selecting it as lambda 1 just to make sure that it is not the module, sensor or wire that is faulty and it's fine. all other 3 cylinder(la 1,la 3, la 4) works fine, i have attached the file and a small logs to review and help out,
thank you, randolph.
marcus.pclx marcus no lambda 2 display.llgx
Hi guys,
just going over the file and i noticed that lambda 2 analogue is set to none, i suppose i've found the problem, i will have the car back tomorrow to confirm,
in any case i will update tomorrow
-
Understood, i will not
mess with it. Just needed a confirmation.
thank you
-
Hi guys, just installed a new link can gauge on a customer car and all is set up and working correctly, but i noticed that in the parameter drop down list there is no (egt display)parameter.
is this how it should be or am i missing something?
-
Checking if anyone have fitted g4+/x to mk3 renault clio rs and if they’ve manage to get the can bus devices to work properly, cheers!
-
honda k20a3
in G4+
Hello guys,
i will be installing a monsoon to a honda k20a3 motor next week and i'm searching for a start-up base pclr, anyone can help.?
this is my mail address:[email protected]
thanks!
Can lambda power supply
in G4x
Posted
Thank you adam, i will sort it out