Alex Deyth
Members-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Alex Deyth
-
Thanks Adam, what pin need to be wired to +14v to power the ecu ? D2-D3 to +14v and C17-A22 to gnd ? other pin are for powering something, like solenoids,etc right ? there is two Aux7 listed on C15/C16, who is who ?
-
Hello, i'm currently rewiring my Impreza, i have a WRX7-9 E-throttle Plugin ECU. I have some problems with the pinout in the PClink software, i dont find the power pin for the ecu. Link Help says +14V on E-4 and GND on E-5 The workshop manual says E-4/E-5 is related to TGV. For ecu power pin is from D-2/D-3 for main +12V, D-10 for backup power and a wake up signal from A-14. I think manual is right and Link help have some errors and omissions. I need a correct version of the ecu pinout with everything (like the wiring pinout version in help) Thanks Alex PS: sorry for bad english PS2 : I do not buy the wirein version because at the time of the purchase I did not think to redo the wiring
-
Hello, i want to remplace my stock tacho with 2 AEM-CD5. I need multiple input to detect activation of turn indicators, headlight, etc. then send the status of the switch by canbus to the CD5. Can I use the Digital input for this purpose ? the signal will be 12V if on, 0V if off. Never used voltage for switch purpose. Thanks
-
ETA for 5.6.6 release ?
-
Thanks adam for clarification, it's explain why Aux 10 is not listed in the Auxilliary Ouptut in the software
-
The info in help files is located in : G4+ ECU Tuning Functions / Electronic Throttle Control. After that is a little mess. I have found the "solution" for me in the Help Browser window in the configuration table of PCLink. Selecting a auxilliary output, PClink throw a list of possible output. For me the ver7-9 unit is capable of controlling EThrottle, because in help file, there is a 2 differents versions 7-9 units : WRXLink (7-9) WRXLink (7-9) With EThrottle The pinouts for expansions connector are not the same and my unit pinout matches the EThrottle version. So I guess my version is capable of Ethrottle control
-
Thank you Adamw, the help is a bit confusing, but at least it's documented will try when i get the hardware.
-
After reading in more detail the help of PCLink G4+ Correct me if wrong : Motor (+) - EThrottle Signal 2 - Aux Output 4 Motor (-) - EThrottle Signal 1 - Aux Output 9 or inverted according to polarity of throttle motor
-
Hello, it is possible to upgrade from Drive by cable thottle to drive by wire throttle on a Link G4+ Plugin WRXLink (7-9) Ecu ? It seems i cannot assign aux 9- to E-throttle (+) or (-) Aux 10 is not listed at all Need to use aux 1-4 for EThrottle Signal 1 and aux 5-9 for Ethrottle Signal 2 ?? Sorry for bad english Thanks Alex
-
Hello, Need base map for Impreza 2003 EDM STI : EJ207 TD05-18G ID1000 FMIC Realy need ignition timing base Thanks Alex