JohnGee Posted May 25, 2019 Report Share Posted May 25, 2019 Hi peeps I have bought a Shifnoid gear shift solenoid for my powerglide drag car and want to set up my Vipec V88 to shift into 2nd at a preselected rev range. What input wire do I use? AUX? and what in the ECU do I go into to set up rev range shifting, Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 25, 2019 Report Share Posted May 25, 2019 So you just want to switch this solenoid on at a certain RPM? Will it need any other conditions to prevent it from shifting during a burnout or anything? What happens when you lift off at the end of the track and RPM drops - is it ok for the solenoid to turn off then? Quote Link to comment Share on other sites More sharing options...
JohnGee Posted May 26, 2019 Author Report Share Posted May 26, 2019 Hi Adam just want it to shift during a run on the track. You've raised some good points too so looking for any recommendations you might suggest for a drag car application. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.