Fuji Posted May 27, 2019 Report Share Posted May 27, 2019 Hi, I have an 05 STi which will be getting a WRX10+ ECU I'd like to add an ECA sensor, but it looks like all the DI inputs are taken up and like the Expansion cable for this model is not going to work properly What are my options? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 28, 2019 Report Share Posted May 28, 2019 Assuming you've got the WRX104+ ecu then I would use DI8 (pin D8). This was originally the "start signal" so is not important - the only thing the ecu uses it for is the pre-crank prime. You can change the pre-crank prime to work in Key-on position rather than start position so no real loss. Quote Link to comment Share on other sites More sharing options...
Fuji Posted May 29, 2019 Author Report Share Posted May 29, 2019 Awesome, thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.