sharvin 1174 Posted June 24, 2019 Report Share Posted June 24, 2019 Hi I have been trying to connect my haltech iq3 dash to a link monsoon ecu through CAN communication but to no avail. When wiring the 34 pin connector from the IQ3 to the ecu connector,the ecu does not detect the dash in the can set up. Any advice? Thanks Sharvin Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2019 Report Share Posted June 24, 2019 The "find devices" tool is only to find Link CAN lambdas, it wont find any 3rd party devices. You will need to set up the ECU as per the IQ3 instructions in the help file and in the dash software you will also need to change the ECU type to Link and then do the "Read Vnet config" process. Quote Link to comment Share on other sites More sharing options...
sharvin 1174 Posted June 24, 2019 Author Report Share Posted June 24, 2019 Where exactly in the dash software do i need to change the ECU type to Link? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2019 Report Share Posted June 24, 2019 The IQ3 manual should explain the config process. Quote Link to comment Share on other sites More sharing options...
sharvin 1174 Posted June 24, 2019 Author Report Share Posted June 24, 2019 Will try to do so and keep you posted. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.