briansfd Posted July 10, 2019 Report Share Posted July 10, 2019 Did a search but wasn't able to find anything. Looking to get the male connector and pin part numbers for the wideband 02 port female can connector and female pin part numbers and female expansion harness connector and pin part numbers thanks! Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 11, 2019 Report Share Posted July 11, 2019 What ecu are we talking about - a plug-in ECU by the sounds, which model? The CAN and exp ports are JST XA series (note you need an expensive crimp tool to do them properly), there is only a couple of ECU's that had a wideband socket - I think it is a mini Mate-N-Lok. Quote Link to comment Share on other sites More sharing options...
briansfd Posted July 11, 2019 Author Report Share Posted July 11, 2019 Hey Adam, Its a PNP Extreme Series 6 RX7 unit. As for the wideband in, it doesnt have it. I saw the port on another post and assumed mine it had it as well. Went home and confirmed that it does not. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted July 11, 2019 Report Share Posted July 11, 2019 I use this crimp tool for the expansion connector pins :- https://www.amazon.co.uk/IWISS-Crimping-AWG28-20-Terminals-Connectors/dp/B078WNZ9FW/ref=sr_1_3?keywords=iwiss+crimp+tool&qid=1562861492&s=gateway&sr=8-3 £14.99 Quote Link to comment Share on other sites More sharing options...
briansfd Posted July 11, 2019 Author Report Share Posted July 11, 2019 thanks for the link! I'll gladly add that to the collection. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.