Waiee Emaran Posted August 7, 2019 Report Share Posted August 7, 2019 hey guys! i just finish wiring link atom 2 on this 4age 20v. now im having a problem with the trigger signal, theres no signal on trigger when cranking the engine. Trigger 1 is on NE, Trigger 2 is G2 and ecu gnd is on GND. this is the trigger setup on my laptop, Trigger Mode, Multi-Tooth Trigger Priority, Trig 1 Trigger 1 type Reluctor, level 1, Cam, 24tooth Trigger 2 type reluctor, level 1, sync mode Cam pulse 1x Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 7, 2019 Report Share Posted August 7, 2019 Toyota distributors often output very low voltage at cranking speed. Set the arming threshold like below for both trigger 1 & 2. Report back if you get RPM displayed with that change. Quote Link to comment Share on other sites More sharing options...
Waiee Emaran Posted August 8, 2019 Author Report Share Posted August 8, 2019 Adamw, i just changed the arming threshold and still i didnt get the RPM. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 8, 2019 Report Share Posted August 8, 2019 If you open the runtimes screen and go to triggers/limits, when cranking does the trig 1 & 2 signal turn green and say yes? If not try pulling the dizzy out and spinning it by hand or with a cordless drill. If you dont get any trigger signal then, it suggests you have a wiring problem. LinkAtom Player 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.