Supra Scotty Posted October 7, 2019 Report Share Posted October 7, 2019 Possible faulty map sensor. Links g4 storm/2jz Hi, I believe I I have a faulty built-in map sensor in my g4 storm. My Supra is running rich and down massively on power. It's throwing fault codes 10 & 11. How could I check that it's operating properly with the link software? Can I wire in a remote link map sensor and what changes would be needed to the ECU setting to suit? Any help with this would be much appreciated as it's been driving me crazy....Haha Quote Link to comment Share on other sites More sharing options...
Simon Posted October 8, 2019 Report Share Posted October 8, 2019 First step will be to get the PC link tuning software connected to check what the MAP sensor is reading at key on engine not running. Fault 10 and 11 both relate to AN volt 1. It is indicating its at either ground or 5V it cant be both at the same time so there might be a setting issue. Supra Scotty 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.