Jimpro Posted November 24, 2019 Report Share Posted November 24, 2019 Good day, Recently purchased a Link G4 for use on a Forester SF5 (ver 5), loaded base map, however car will not start, it seems to be flooding cylinders with fuel, kicks like it wants to start but it doe not. Any ideas? Kenneth Chan - 2001 Forester.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 25, 2019 Report Share Posted November 25, 2019 It would be more helpful to see a log, but the first few things that jump out to me as probably wrong in your attached map: MAP sensor is reading wrong, it shows 79KPa while your BAP shows 101KPa. So I suspect you MAP sensor calibration is different to a WRX. Engine kill/ECU hold power is showing as active. It looks like your ignition switch signal is missing from DI5. Fuel master is set to 5ms, this is very small. More typical numbers would be about 9ms for 1000cc injectors or 17ms for 500cc injectors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.