Nadeerawick Posted January 26, 2020 Report Share Posted January 26, 2020 Hi Link family, I need your support I’m a beginner for tuning I got a link G4 monsoon and running 2003 RSX (Base) K20 (Stock Motor) and stock injectors 270cc. I was step up injector for traditional with pump gas 98. Now I want to run Modelled Mode. I got stuck in the Injector dead time and short pulse wide. I have found Injector dead time in HONADTA, but still I cannot find the short pulse wide Can you help me to find this and if there is any formula please share with me? Injector Dead Time Injector Deadtimes Batt Voltage (V) 6.07 8.09 10.69 14.06 16.08 4.72 2.38 1.3 0.84 0.66 Injector Flow @ Rated Pressure? Injector short Pulse wide? Base Fuel Pressure? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 26, 2020 Report Share Posted January 26, 2020 Set short pulse width adder to 0, with such small injectors they will never be operating with a short pulse width so it doesnt matter. Injector flow @ rated pressure will be 270cc & 300Kpa. Set base fuel pressure to whatever static fuel pressure you are running (with engine off). Nadeerawick 1 Quote Link to comment Share on other sites More sharing options...
Nadeerawick Posted January 26, 2020 Author Report Share Posted January 26, 2020 Thanks for the Reply Adam. did you see the injector dead time whether is correct what i have mentioned ? Quote Link to comment Share on other sites More sharing options...
cj Posted January 26, 2020 Report Share Posted January 26, 2020 I havent double checked those values for you , but if you copied those values from a hondata base map they are probably pretty accurate. I've done the same thing myself a few times and things have worked well. Just make sure it was a hondata tune with 270's and not 310's or whatever the newer ones were. Also, the voltage breakpoints in the hondata tunes are different than link default so you have to adjust your axes in the link config or play with excel a bit Nadeerawick 1 Quote Link to comment Share on other sites More sharing options...
Nadeerawick Posted January 26, 2020 Author Report Share Posted January 26, 2020 Ok thanks a lot for quick feed back Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.