Ammaraa Posted February 29, 2020 Report Share Posted February 29, 2020 How we can do the setting for 2JZ VVTI engine on Link monsoon X model .? The g4X not like is G4+ The interface is completely different . Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted March 3, 2020 Report Share Posted March 3, 2020 Actually is almost the same, where is that you are havin problems exactly? Quote Link to comment Share on other sites More sharing options...
TechDave Posted March 4, 2020 Report Share Posted March 4, 2020 As per my email to you: It's super easy. Select the Toyota 1JZ cam control mode, then under "cam angle test", select calibrate. Go to Inlet Bank 1, select a cam sensor input (trig 2) and a PWM output. Make sure the engine is above the ect lock out, run the engine up to 4000ish rpm All of the offsets, teeth etc are filled in automatically for you, you only need to set up your target table. mapper 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.