Stu Posted March 28, 2020 Report Share Posted March 28, 2020 Hi guys, basic set up - ignition only. 4 cyl wasted spark, 36-1 trigger wheel, two wire reluctor sensor (polarity correct and good signal output), connected ECT and MAP. Good earths, good voltage during cranking but no spark. Passed ignition test. Used G4+ Atom Sample.pclr and am pretty sure I’ve followed set ups but have obviously got something wrong. Any help would be much appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 28, 2020 Report Share Posted March 28, 2020 Have you got trigger 2 sync mode set to "none". Otherwise attach a short log of it cranking. Quote Link to comment Share on other sites More sharing options...
Stu Posted April 4, 2020 Author Report Share Posted April 4, 2020 Thanks Adam, that’s exactly what the problem was. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.