millsys 25 Posted April 5, 2020 Report Share Posted April 5, 2020 i am currently working on a mini with mini link and a aim dash is there a way i can get a warning light to illuminate when turning to on or off through the link as the car didn’t have factory tc controll also how do i get the dash to display the ethanol content Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 6, 2020 Report Share Posted April 6, 2020 Attach your dash config and ECU map and I can set it up. millsys 25 1 Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted April 9, 2020 Author Report Share Posted April 9, 2020 mxs 1.2 justin.aimcfg justin 1.8t.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2020 Report Share Posted April 10, 2020 That doesnt appear to be your dash config, it should have a file extension .zconfig. To get your config, in race studio3, go to the configs page (gear icon) then put a tick in the checkbox for your config, then click export. millsys 25 1 Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted April 10, 2020 Author Report Share Posted April 10, 2020 MXS 1.2 Strada 03.zconfig also would it be possible to put something in plce to say that the traction control is active? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2020 Report Share Posted April 11, 2020 Ok, try the attached. Make sure you are using the latest Race studio 3 and latest firmware in your dash. The screen set-up in your dash config looked a bit messed up on my PC so I suspect you maybe on an old firmware. There are many new screens added in later versions. I have just set up one basic page with an icon for TC, and alarm message for TC and a flashing LED when TC is off. justin1.8t NewCAN1.0.pclr Millsys25 Eth and TC.zconfig millsys 25 1 Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted April 11, 2020 Author Report Share Posted April 11, 2020 worked like an absolute charm lol on another note how hard would it be to get what boost setting the car is in displayed also as it has a 11 position switch fitted and say setting 1 to 3 are just boost and 4 to 6 are boost with anti lag also we have a switch for rolling launch fitted just thinking it would be cool to add them too if its possible Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 13, 2020 Report Share Posted April 13, 2020 Have you changed either the ecu or dash config from the one I attached? Is so please attach your latest so I dont undo all your setup. Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted April 13, 2020 Author Report Share Posted April 13, 2020 hi I did have a go myself can see where to do the link end but cant figure the aim side of it Millsys25 Eth and TC.zconfig justin 1.8t mini.pclr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.