jonnyt80 Posted April 6, 2020 Report Share Posted April 6, 2020 i have the Xtreme Red and are about to wire in for Ethrottle. i have read on another post that depending on hold old/recent my ecu is i may need to wire in an isolation relay. can anyone confirm if my ecu will require this add on serial number is 18115 thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 6, 2020 Report Share Posted April 6, 2020 You will need to wire in a E-throttle relay no matter which ecu you have. Wiring info for the E-throttle relay is in the help file page: Wiring Information > Output Wiring > E-Throttle > Generic Internal E-Throttle Wiring Quote Link to comment Share on other sites More sharing options...
jonnyt80 Posted April 6, 2020 Author Report Share Posted April 6, 2020 Thank you adam Reason I asked is one of the posts I found was one you had answered which was said that depending which revision of board used meant whether a relay was needed I will wire in a relay Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 6, 2020 Report Share Posted April 6, 2020 8 minutes ago, jonnyt80 said: Thank you adam Reason I asked is one of the posts I found was one you had answered which was said that depending which revision of board used meant whether a relay was needed I will wire in a relay Thanks Maybe it was discussing a plug-in ECU? Or an old G4 Xtreme, some of which didnt have E-throttle? Quote Link to comment Share on other sites More sharing options...
jonnyt80 Posted April 6, 2020 Author Report Share Posted April 6, 2020 No worries at all I'll get onto it now I know Thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.