Lallego Posted April 12, 2020 Report Share Posted April 12, 2020 Howdy everyone, hope all is well! Overview: Bought an android 2DIN and loaded RealDash. Changed MAP baudrate to 38000, continuous long strand data and used the "super lightweight" free dash. I modified the labels/text/bar and input values from the engine/ECU inputs but still, I don't receive any data out of it. I'm hoping to display the correct AFR (I tried both AFR 1/2 and AFR Targets 1/2) to no avail and the MAP (psi) which I also used Manifold Absolute Pressure and MAP dot with no luck. Parts: https://www.amazon.ca/ATOTO-A6Y2721PRB-Android-Navigation-Stereo/dp/B07DHDBCQD/ref=sr_1_3?crid=1TG4DK5Q2IA0B&keywords=atoto%2Ba6&qid=1586713546&sprefix=atoto%2Caps%2C158&sr=8-3&th=1 http://dealers.linkecu.com/NGTRX Attachments: .rd Dash I'm using. Looking forward to hearing your inputs, no pun intended Thanks! Best Basic Starting to figure it out.rd Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 13, 2020 Report Share Posted April 13, 2020 When you say "I dont receive any data", does that mean nothing is working on the dash? Does realdash say "connected to link ECU" or similar at the bottom? Quote Link to comment Share on other sites More sharing options...
Lallego Posted April 13, 2020 Author Report Share Posted April 13, 2020 5 hours ago, Adamw said: When you say "I dont receive any data", does that mean nothing is working on the dash? Does realdash say "connected to link ECU" or similar at the bottom? I don't receive data for some of the outputs I was expecting. Ofcourse I receive data for Batt voltage, ECT, TPS, but I don't receive anything out of AFR and MAP. Thanks, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.