Benzilla15 Posted April 17, 2020 Report Share Posted April 17, 2020 Hi im doing a NA-T conversion so im new to the standalone ECU side of things the car was running on this ECU i pulled the engine rebuilt it and put a FFIM on, Now when i turn the key it cranks ive got fuel but no spark i used the F12 feature to display my runtimes and ive got trigger 1 yes but no trigger 2 could someone please tell me where i need to be looking as i know these dont have a crank sensor So where does it accuire its trigger 2 signal through this process 3 wires have been extended but i have checked continuity and they all have connection. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 17, 2020 Report Share Posted April 17, 2020 So does this car have a distributor? If so, trigger 1 and trigger 2 signals come from two sensors inside the distributor. The 24 tooth wheel is trigger 1 and trigger 2 would have a single tooth. What ecu do you have? edit: just noticed the title says supralink. Assuming it is a g4+, can you do a trigger scope. how to do it: https://1drv.ms/v/s!AiYbYlZQuRHPmieMTkwQDCXEb2LY Quote Link to comment Share on other sites More sharing options...
Benzilla15 Posted April 17, 2020 Author Report Share Posted April 17, 2020 The car does have a distribuorr currently and after some tinkering and a friends working car ive narrowed it down to faulty ignitor (5 pin plug that sits on the body ) i put mine on his car and it didnt start i couldnt put his on mine as we wasnt at my car i have ordered another ignitor once installed i will update, and thank you for showing me how to do the trigger scope i will do this once the new ignitor is fitted. Yes its a G4+ xtreme Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 18, 2020 Report Share Posted April 18, 2020 You can still do a triggerscope without the ignitor. You originally said you had no fuel and no trigger 2 signal, the ignitor wouldnt affect either of these. Quote Link to comment Share on other sites More sharing options...
Benzilla15 Posted April 21, 2020 Author Report Share Posted April 21, 2020 Afternoon Adam, right so i done the trigger scope and none of them flinched there was nothing no activity how ever trigger 1 still turns green when i turn the key so i dont understand, also i have discovered i have another issue TP Main reads 3.7% constantly i touch the pedal it goes down to 0.0% almost instantly, my assumption is its not wound back correctly when fitted to my throttle body would you aggree? and also would that stop triggers? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22, 2020 Report Share Posted April 22, 2020 If the trigger 1 signal runtime turns green that would suggest the ecu is receiving some type of signal. Are you sure when doing the triggerscope that you clicked the capture button while the engine was cranking? Can you also do a log of it cranking. Here's a quick vid showing how to set up and work the logging: https://www.youtube.com/watch?v=_P1LRANeO4A Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.