Hamuod Posted May 8, 2020 Report Share Posted May 8, 2020 Hello there I have 2jz drag supra will be running 12 injectors all siemens deka 2400cc Low Impedance on my link g4+ fury im running high octane q16 vp fuel with 200 shot nitrous i would like to know how to wire the staged injectors in to groups for each cylinder since im using Inj 7 = Sec Group 1 and Inj 8 = Sec Group 2 is this order the right way to wire it? Inj 7 = Sec Group 1= sic1 sic2 sic3 Inj 8 = Sec Group 2= sic4 sic5 sic6 can you please check if my settings are correct for the staged injector setup secPW lockout= 0.60ms ??? since im using the same injector's would you recommend to use 50% in Sec Injection Staging Table Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 8, 2020 Report Share Posted May 8, 2020 You proposed inj wiring would be correct. Having 3 low impedance injectors connected to a single drive is a bit boarder line but give it a try. Set peak to 10A and hold to 3A. I suggest for staging mode you use Sec/Pri flow ratio, set the Sec/Pri flow ratio to 1.0, and you want 50% as the largest number in your staging table. For Sec PW lockout I would suggest something more like 1ms to make sure you are working in the Injectors linear region. Hamuod 1 Quote Link to comment Share on other sites More sharing options...
Hamuod Posted May 8, 2020 Author Report Share Posted May 8, 2020 Thanks Adam i will give it a try Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.