Joker Posted May 10, 2020 Report Share Posted May 10, 2020 Anyone know how to program Link Fury to send signal to BA Falcon dash so speedo will work ??? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 10, 2020 Report Share Posted May 10, 2020 Choose the CAN module that you wired to the car CAN bus and set the CAN mode to BA Falcon. Quote Link to comment Share on other sites More sharing options...
Joker Posted May 10, 2020 Author Report Share Posted May 10, 2020 Hi Adam, we have made a custom car and put a BA Falcon engine in it, G4 to run engine etc, runs a c4 auto trans with plug in adaptor instead of speedo cable runs wires, my sparky is struggling to program the G4 to send signals to dash to run as need speedo to work to complete cert. Apparently need to find the correct code to run speedo Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 10, 2020 Report Share Posted May 10, 2020 The only thing you need to do as far as the ECU is concerned is turn on the setting that I showed above. Whether the dash will actually work without all the other electronic modules from the original car is unknown. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.