azmak Posted May 11, 2020 Report Share Posted May 11, 2020 Please let me know. I'm using the LINK Monsoon G4+. I wanted to connect the VSV to the AUX4 to control the purge. But the VSV didn't work. I used a circuit tester to check the voltage and thought it was fine. When I tried to connect the power detector lamp, it still did not turn on. However, it is normal on a circuit tester. I tried connecting a relay to it, but it didn't work. I also tried the AUX5 and got the same results. Am I doing something wrong? Best regards Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 11, 2020 Report Share Posted May 11, 2020 The aux outputs switch to ground, they dont supply voltage. Does the valve click when you set the aux output to "Test(on)"? Quote Link to comment Share on other sites More sharing options...
azmak Posted May 11, 2020 Author Report Share Posted May 11, 2020 I understand. Thank you very much. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.