RichardT Posted June 2, 2020 Report Share Posted June 2, 2020 Hey all, Installing a link 3 bar map sensor onto my sr20det running a link G4, but have no option for a link 3 bar sensor in sensor type. Any ideas, Cheers. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 2, 2020 Report Share Posted June 2, 2020 This should do it: Quote Link to comment Share on other sites More sharing options...
RichardT Posted June 3, 2020 Author Report Share Posted June 3, 2020 Followed the above, unfortunately when i go to calibrate the map sensor i get a... command failed: current map +/- 5kpa of baro reading. Just checking in case i have done something wrong, i have wired up the sensor via the MAF sensor wiring (have been told that it is possible) and would i still use An volt 5 for this. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 3, 2020 Report Share Posted June 3, 2020 I cant really say for sure since you havent mentioned what ecu/car you have. But assuming it is the S13 or S15 ecu then most likely your AFM signal is on AN Volt 4. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.