DriftKr6l Posted June 10, 2020 Report Share Posted June 10, 2020 Hey Guys, I have a problem, when I plugged into my G4+ ECU it said that it is e throttle capable, but it looks like it lacks the correct plugs to support ethrottle? What is up with that? Here are the details Here is the actual ECU Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 10, 2020 Report Share Posted June 10, 2020 You have quite an old ECU, the V1.5 bottom board is approx 5 years old. E-throttle was only introduced in Bottom board revision V1.7. The actual ECU (the Top board with all the electronics) has the E-throttle controller built-in and enabled, but the outputs are not connected to anything on the bottom board. You can return to Link for a "bottom board swap" if you want it updated to the latest V.7. Cost to do this is about NZD$290 last I heard. Quote Link to comment Share on other sites More sharing options...
DriftKr6l Posted June 11, 2020 Author Report Share Posted June 11, 2020 Thanks for the quick reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.