Poseidon Posted June 20, 2020 Report Share Posted June 20, 2020 Is there a list of what lies behind the can bus mini r50-r53need the data for wheel speed.Data: Receive user, ID496, Format: Normal or?Stream Frame: Start pos, width, byte order, type .... from LF / RF / LR / RR Wheel SpeedI currently have start pos LF = 0, RF = 16, LR = 32, RR = 48 and width 12, LS First ...no function Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 20, 2020 Report Share Posted June 20, 2020 It was already set up and working in the E46 map I gave you months ago. The Mini wheels speeds are exactly the same. Quote Link to comment Share on other sites More sharing options...
Poseidon Posted June 20, 2020 Author Report Share Posted June 20, 2020 doesn't Work Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2020 Report Share Posted June 21, 2020 17 hours ago, Poseidon said: doesn't Work What doesnt work? Are you saying the mini stream works and my map doesnt? They are the same as far as I can see. I had traction control working fine in the car I tested. Quote Link to comment Share on other sites More sharing options...
Poseidon Posted June 21, 2020 Author Report Share Posted June 21, 2020 if i have mini it works, which one of them doesn't Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2020 Report Share Posted June 21, 2020 Can you attach your tune with the working set up and the not working set up. Quote Link to comment Share on other sites More sharing options...
Poseidon Posted June 22, 2020 Author Report Share Posted June 22, 2020 on the first picture that works at least that I see all under runtime.however, with this setting I cannot do the other functions With these settings of you it does not work, but my other functions Quote Link to comment Share on other sites More sharing options...
Poseidon Posted June 25, 2020 Author Report Share Posted June 25, 2020 There is nothing to find out about the mini can bus Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 26, 2020 Report Share Posted June 26, 2020 Im not sure what you are doing wrong then, it works fine for me. Here is me sending the same CAN data testing the Mini stream vs the E46 file I gave you. The speed calibration is slightly different but data comes through correctly (mini uses 10/15 with a small offset, my E46 file uses 10/16 with no offset). It might be a good idea to turn off the OBD2 that you have set to CAN 1. Here is the Mini CAN template with data 0x5E6 (decimal 1510) input via CAN. LF wheel shows 100Kmh : And here is my E46 setup (I just changed stream 5 to CAN 1 because it was convenient for me to connect my CAN tool to). Same CAN data 0x5E6 being sent, LF Wheel shows 94Kmh: Quote Link to comment Share on other sites More sharing options...
Poseidon Posted July 2, 2020 Author Report Share Posted July 2, 2020 I checked everything again and also deactivated other settings to only have this setting.but without success will test mini again soon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.