Guest |543| Posted November 20, 2011 Report Share Posted November 20, 2011 I keep getting all kinds of error codes and access violations and my layout keeps saying line 0 empty. What is going on? It is happening on more that 5 ecu's and 2 different computers. Any ideas of what has happend? Thanks Quote Link to comment Share on other sites More sharing options...
Guest |851| Posted November 21, 2011 Report Share Posted November 21, 2011 I get the same access violation stuff every time i move my laptop from the docking station to the car or vise versa, basically have to restart the vts every time, have found no solution to this, nor has the vipec support been able to help. i offered to run a debug build and send the logs but it seems thats not how they work. the other error i've gotten when using scandinc letters on the tool for example saving display tabs with äö type of letters on them. it seems that that data is also stored to the ecu but it does not encode stuff properly. as a fix i just stopped using anything but the very basic ascii. Quote Link to comment Share on other sites More sharing options...
ashesman Posted November 21, 2011 Report Share Posted November 21, 2011 I am not 100% sure what is causing the first error. I am reasonably confident that it can be fixed by reinstalling VTS. If you send your layout files we will try opeining them and see if the problem is that they have become corrupt. If it is the case then it will be possible to implement a fix to prevent this condition in the future. Access Violations are programming mistakes that are usually easily fixed if they can be found. Unfortunately the numbers they give in the message are no use for finding them. Please send your layout files and any other info so we can reproduce and fix this problem. The second issue (characters causing problems) is to do with the fact that VTS is not written in a unicode compliant system. We have stared converting VTS over to support uniccode but it may be some time before it is released as this is no small task. Quote Link to comment Share on other sites More sharing options...
Guest |543| Posted November 22, 2011 Report Share Posted November 22, 2011 Thanks for the replies. If I just uninstall and then reinstall the vts program will I lose all of my pcl files? If it is my format that has been corrupted then I can easily just build a new format starting from the default one correct? That would be a easy fix. Thanks.. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 23, 2011 Report Share Posted November 23, 2011 I would suggest taking a copy of the PCL files and save them to say the desk top. Then you can remove and do as you like with the program. And yes if it is the format only then you can start one form scratch. Quote Link to comment Share on other sites More sharing options...
Guest |543| Posted November 24, 2011 Report Share Posted November 24, 2011 Ok, thank you. I will try that. it just sucks because I have 100's of maps to do this with. Any good suggestions to copy a lot of maps onto one device or desktop? thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted November 27, 2011 Report Share Posted November 27, 2011 You can copy all the file using windows explorer (same as for any windows file) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.