Guest |1006| Posted November 28, 2011 Report Share Posted November 28, 2011 I have an EVO IX pnp Vi-pec ECU and receive an error message (Store failed) when I try to store any changes. The ECU shows it is connected (green) in top right corner and it loads normally. I have the latest firmware. When I press F4, it tries to store, then suddenly disconnects, then reconnects and I receive the "store failed" error code. Any idea why? Any help is much appreciated. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 28, 2011 Report Share Posted November 28, 2011 This was an issue between older firmware and newer VTS. The store will actually be happening. You should find all your settings remain even after cycling the power. Going to the latest VTS and firmware will solve the issue. Quote Link to comment Share on other sites More sharing options...
Guest |1006| Posted November 28, 2011 Report Share Posted November 28, 2011 I'll give it a try, thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.